Anaerobic Digester Monitoring Helps Avoid Process Upsets And Maximize Biogas Production
Anaerobic Digester Monitoring Helps Avoid Process Upsets and Maximize Biogas Productio
Source : https://www.hach.com/
Introduction to Anaerobic Digestion
Anaerobic digestion is a commonly used technology in municipal and industrial solids stabilization processes. Stabilization is a process that reduces the treatment process’ sludge pathogen content, rendering the product safe for beneficial use or disposal. Anaerobic digestion is used in various private industries and is utilized by roughly 10% of all municipal water resource recovery facilities (WRRF). Anaerobic digestion differs from other stabilization processes in its potential to recover
energy via captured biogas. Biogas is produced as a byproduct of the digestion process and can be used in boiler systems for heat production, engines/turbines connected to generators for energy generation or even further treated to produce other fuels, such as natural gas. This ability to capture stored energy present in our waste streams makes anaerobic digestion an attractive technology as water resource recovery facilities continue to work towards resource recovery as an integrated aspect to regulatory compliance.
Only logged in customers who have purchased this product may leave a review.
Related products
Industrial Pretreatment Programs
Pretreatment is the reduction of the amount of pollutants, the elimination of pollutants, or the alteration of the nature of pollutant properties in wastewater prior to, or in leu of, discharging or otherwise introducing such pollutants into a POTW. The reduction or alteration may be obtained by physical, chemical or biological processes, process changes or by other means, except as prohibited by 40 CFR 403.6(d)
Industrial Pretreatment Programs
Pretreatment is the reduction of the amount of pollutants, the elimination of pollutants, or the alteration of the nature of pollutant properties in wastewater prior to, or in leu of, discharging or otherwise introducing such pollutants into a POTW. The reduction or alteration may be obtained by physical, chemical or biological processes, process changes or by other means, except as prohibited by 40 CFR 403.6(d)
Alternative Water Treatment Technologies for Cooling Tower Applications
This GSA Proving Ground (GPG) project assessed the performance of three alternative water treatment systems (AWT) for cooling tower water treatment applications at the Denver Federal Center (DFC) in Denver, Colorado. Cooling towers are commonly applied to water cooled chilled water plants in medium to large commercial buildings and are the point in the system where heat is dissipated to the atmosphere through the evaporative cooling process. Cooling towers also consume a large amount of water. Cooling tower related water consumption is one of largest potable water loads within buildings in the United States, with over 26% of water use associated with heating and cooling. Reducing water consumption is a priority for the General Services Administration (GSA) due to Executive Order 13693, Energy Policy Act of 1992, and regional water shortages. These factors have brought about the investigation of cost effective opportunities to reduce water use, such as AWT technologies for cooling towers. The current state of water treatment in GSA buildings is to use conventional chemical based cooling tower water treatment to maintain cooling tower water quality and contract out this specialized service to a third-party company specializing in such service.
Alternative Water Treatment Technologies for Cooling Tower Applications
This GSA Proving Ground (GPG) project assessed the performance of three alternative water treatment systems (AWT) for cooling tower water treatment applications at the Denver Federal Center (DFC) in Denver, Colorado. Cooling towers are commonly applied to water cooled chilled water plants in medium to large commercial buildings and are the point in the system where heat is dissipated to the atmosphere through the evaporative cooling process. Cooling towers also consume a large amount of water. Cooling tower related water consumption is one of largest potable water loads within buildings in the United States, with over 26% of water use associated with heating and cooling. Reducing water consumption is a priority for the General Services Administration (GSA) due to Executive Order 13693, Energy Policy Act of 1992, and regional water shortages. These factors have brought about the investigation of cost effective opportunities to reduce water use, such as AWT technologies for cooling towers. The current state of water treatment in GSA buildings is to use conventional chemical based cooling tower water treatment to maintain cooling tower water quality and contract out this specialized service to a third-party company specializing in such service.
An Industrial Facility’s Guide To Cooling Tower Water Treatment
For an industrial company using a cooling tower for its facility, some type of cooling tower water treatment system is usually necessary to ensure an efficient process and lengthy equipment service life.If cooling tower water is left untreated, organic growth, fouling, scaling, and corrosion canreduce plant productivity, cause plant downtime, and require costly equipment replacements down the road.
An Industrial Facility’s Guide To Cooling Tower Water Treatment
For an industrial company using a cooling tower for its facility, some type of cooling tower water treatment system is usually necessary to ensure an efficient process and lengthy equipment service life.If cooling tower water is left untreated, organic growth, fouling, scaling, and corrosion canreduce plant productivity, cause plant downtime, and require costly equipment replacements down the road.
Finnish Industrial Wastewater Guide
Introduction:
This guide describes Finnish practices for managing industrial wastewater and provides instructions for drawing up an industrial wastewater agreement. The purpose of this guide is to provide support for all those who are involved in decision-making concerning the conveying of industrial wastewater to sewers and the safe treatment of it at municipal wastewater treatment plants. The guide describes the industrial wastewater related legislation currently valid in Finland, information on different types of industrial waters, instructions for preparing an industrial wastewater agreement, formula of increased fee, monitoring of industrial wastewater and practical examples of functional solutions. The guide describes the various stages in drawing up an industrial wastewater agreement and matters that have to be taken into account in preparing such an agreement. The aim of this guide is to provide as many concrete examples and
instructions as possible. However, when preparing an industrial wastewater agreement, it is always recommended to use case-specific discretion and take the local circumstances in account. The specific properties of industrial wastewater must be taken into account in the
industrial wastewater agreement. The quality of wastewater conveyed to the sewers has impacts on the occupational safety of the employees of the water utility, the condition of the sewerage network and equipment of the treatment plant, the operation of the
treatment process, the sludge quality and the state of the recipient water body. All these aspects must be taken into account in the agreement.
Finnish Industrial Wastewater Guide
Introduction:
This guide describes Finnish practices for managing industrial wastewater and provides instructions for drawing up an industrial wastewater agreement. The purpose of this guide is to provide support for all those who are involved in decision-making concerning the conveying of industrial wastewater to sewers and the safe treatment of it at municipal wastewater treatment plants. The guide describes the industrial wastewater related legislation currently valid in Finland, information on different types of industrial waters, instructions for preparing an industrial wastewater agreement, formula of increased fee, monitoring of industrial wastewater and practical examples of functional solutions. The guide describes the various stages in drawing up an industrial wastewater agreement and matters that have to be taken into account in preparing such an agreement. The aim of this guide is to provide as many concrete examples and
instructions as possible. However, when preparing an industrial wastewater agreement, it is always recommended to use case-specific discretion and take the local circumstances in account. The specific properties of industrial wastewater must be taken into account in the
industrial wastewater agreement. The quality of wastewater conveyed to the sewers has impacts on the occupational safety of the employees of the water utility, the condition of the sewerage network and equipment of the treatment plant, the operation of the
treatment process, the sludge quality and the state of the recipient water body. All these aspects must be taken into account in the agreement.
Best Management Practices for Industrial Water Users
Introduction:
The industrial water user should determine if implementation of each identified BMP measure to achieve water savings would be cost effective. The analysis should determine the cost effectiveness to the industrial water user of the lower direct costs of the saved water and other cost savings that may also accrue. Many operating procedures and controls that improve water use efficiency should be implemented simply as a matter of good practice. In other cases the industrial user may decide to implement BMPs based on non-cost factors such as public good will or political reasons. In evaluating equipment and process additions or changes, each industry should utilize its own criteria for making capital improvement decisions.
Best Management Practices for Industrial Water Users
Introduction:
The industrial water user should determine if implementation of each identified BMP measure to achieve water savings would be cost effective. The analysis should determine the cost effectiveness to the industrial water user of the lower direct costs of the saved water and other cost savings that may also accrue. Many operating procedures and controls that improve water use efficiency should be implemented simply as a matter of good practice. In other cases the industrial user may decide to implement BMPs based on non-cost factors such as public good will or political reasons. In evaluating equipment and process additions or changes, each industry should utilize its own criteria for making capital improvement decisions.
Reviews
There are no reviews yet.